Grupy
-
Manufacturer HELLA Catalog no: 6PU 358 216-201 Number of pins : 2 Fitting Position : Rear Axle Cable Length [mm] : 713 Sensor Type : Active sensor Brief Information : *** HELLA Electronics OE competence for over 60 years.
20.81 EUR netto25.60 EUR -
Manufacturer HELLA Catalog no: 6PP 358 139-481 Supplementary Article/Info 2 : Control Unit/Software must be trained/updated Frequency Range [MHz] : 433 Colour : black Brief Information : *** HELLA Electronics OE competence for over 60 years. Technical Information : "Universal tyre pressure sensors from HELLA.<br>A wide range of vehicles can be covered with just one type o<br>f sensor.<br>Now available in different looks and colours.<br>The sensor must be programmed and, if necessary, taught-in."
20.82 EUR netto25.61 EUR
-
Manufacturer HELLA Catalog no: 6PU 012 039-751 Cable Length [mm] : 871 Sensor Type : Hall Sensor Number of pins : 2 Brief Information : *** HELLA Electronics OE competence for over 60 years.
20.82 EUR netto25.61 EUR
-
Manufacturer HELLA Catalog no: 9AB 165 229-031 Fitting Position : Left Light Design : Halogen paired article number : 9AB 165 230-031
20.82 EUR netto25.61 EUR
-
Manufacturer HELLA Catalog no: 9AB 165 230-031 Fitting Position : Right Light Design : Halogen paired article number : 9AB 165 229-031
20.82 EUR netto25.61 EUR
-
Manufacturer HELLA Catalog no: 5DA 358 057-621 Number of pins : 2 Ignition Coil : Flush-Fitting Pencil Ignition Coils
20.84 EUR netto25.63 EUR
-
Manufacturer HELLA Catalog no: 5DA 358 168-061 Voltage [V] : 14 Number of pins : 4 Ignition Coil : Flush-Fitting Pencil Ignition Coils
20.84 EUR netto25.63 EUR
-
Manufacturer HELLA Catalog no: 6FH 354 116-261
20.84 EUR netto25.63 EUR
-
Manufacturer HELLA Catalog no: 5DA 358 168-111 Voltage [V] : 14 Number of pins : 3 Ignition Coil : Flush-Fitting Pencil Ignition Coils
20.86 EUR netto25.66 EUR
-
Manufacturer HELLA Catalog no: 6FH 354 111-441
20.86 EUR netto25.66 EUR
-
Manufacturer HELLA Catalog no: 6FH 354 120-371
20.86 EUR netto25.66 EUR
-
Manufacturer HELLA Catalog no: 8HG 006 294-031 Length [mm] : 105 Supplementary Article/Info 2 : with cap Supplementary Article/Info 2 : with nut Supplementary Article/Info 2 : with bolts/screws Number of bolts/screws : 2 DIN/ISO : 72 591 Diameter [mm] : 24 Number of pins : 1 adjustable : adjustable Technical Information : for Matador 1G4 003 470-147 and bracket attachment foot<br>8HG 990 320-001<br>With built-in electrical socket to DIN 72 591 and rubber<br>protecting cap. For mounting beacon on support at side of<br>vehicle or for welding to a flange, 24 mm dia., approx<br>100 mm.<br>Swivelling holder for screwing onto horizontal and vertical<br>cabin roofs
20.86 EUR netto25.66 EUR
